Functional 3000 MKIV Pip boy Accessory for Use with a Phone | Raw DIY Parts Kit
This kit is designed for use with any phone less than 177mm long, x 88mm wide x 18mm thick. Smaller phones will need a little padding.
With this setup you can use the app but you may have to get the android version from apk mirror.
This kit has been redesigned to be very easy to build and wear. There is a locking mechanism to snap the two halves together.
We offer this kit for the left or right arm!
Things you will need to finish the kit:
Utility or hobby knife
Sand paper: 150 - 400 grit sand paper
10mm - 20mm thick foam atleast 177mm x 88mm
Foam, padding or cloth for around your arm.
Cyanoacrylate glue (Super Glue)
Primer: Filler primer works best
Paint
Optional: 2" wide double sided velcro
Instructions
Here is a link to our instructions for this kit: https://www.3dcauldron.com/post/instructions-for-the-diy-phone-version